What Should We Note During the Installation of Large Angle Belt Conveyor

Large angle belt conveyor can be transported with large inclination , it even can be vertical. It adopts sidewall belt as the main part. The advantages are: large conveying amount, small space occupation ,small noise etc. which is widely used for conveying powder, blocked material. Here PK Machinery will introduce the installation notes during installation:
1.Check whether the components of large angle belt conveyor are complete or not
Generally speaking, belt conveyor includes lots of components: head & tail frame, concave & convex segmental arc frame and middle frame, however, the quantity of trough roller frame, rollers and sealing cover is big, you need to check carefully and guarantee the components are transported to the right place.
2.Installation, positioning and welding of head and tail frame, concave and convex segmental arc frame
First of all, please find the center line of the belt conveyor by using a steel wire. When installation, please make the head & tail frame, concave & convex segmental arc frame subject to the center line.

 

3.Check belt running and adjust the belt if it runs off tracking
After installation of belt, trough roller, self-aligning roller and vertical roller, connect the power supply , run the belt and adjust the belt offset distance .
4.Installation of large dip Angle belt conveyor accessories and bolts
After adjusting the belt, you can start to install the sealing cover, head cover and fastening bolts.

Three Horizontal Sections of Large Angle Belt Conveyor

Large angle belt conveyor is suitable for the unit mass of 500 ~ 2500 kg/m3 and the material large size of about 100 ~ 250 mm, the features of large angle belt conveyor are: simple structure, convenient maintenance, space saving and investment saving. Here PK Machinery will explain and introduce three kinds of horizontal section:
1. Upper horizontal section
In order to adapt to the requirement of different discharge height, the head frame is divided into low type frame (head frame height = 1000 mm), middle type head frame (head frame height = 1100 ~ 1100 mm) and high type head frame (head frame height = 1600 ~ 1600 mm).
Correspondingly, low type convex segmental arc frame and low type middle frame support (matched head height = 1000 mm), middle type convex segment frame and middle type frame support (matched head frame height = 1100 ~ 1500 mm), high type convex segment frame and high type middle frame support (matched head frame height = 1600 ~ 1600 mm) will match with upper horizontal section respectively
2. Lower horizontal section
The lower horizontal section adopts low type middle frame support.
3. Inclined section
The inclined section of large angle belt conveyor adopts low type middle frame support. When the conveyor inclined angle β ≧ 45 °, we suggest adopting Ⅱseries low type middle support.

The connection of upper horizontal section and inclined adopts the convex arc segments frame , and the lower horizontal section and inclined section adopt concave segmental arc frame to connect so as to realize the smoothconveyor belt transition.

Please Focus on Belt Speed Selection and Principle of Belt Conveyor

As we all know, the most decisive factor of belt conveyor throughput is the belt speed, here we would like to introduce the selection method of belt conveyor belt speed:

(1) If the conveying capacity of belt conveyor is large, belt width is wide, please select a high belt speed.
(2) If the material is easy to move with big granularity and strong grinding property, please select a low belt speed.
(3) If material conveying interval is long, please choose a high belt speed; If material conveying interval is short and the conveyor angle is big, please select a low belt speed.
(4) If there is large amount of dust during conveying, the belt speed would be 0.8 m/s ~ 1 m/s.
(5) If belt conveyor works with a discharging tripper, the belt speed should not be higher than 2.5 m/s.
(6) If belt conveyor conveys finished product items, the belt speed should be less than 1.25 m/s.

Belt speed selection principle of belt conveyor : the belt speed of belt conveyor is related to belt width, throughput, material size, material properties and conveyor angle. When belt conveyor transports upward and dip angle is large, the tape speed should be low; When belt conveyor transports downward, the belt speed should be much lower. Belt speed selection also should match the cooperated material discharging equipment type, when adopts plough type discharging machine, the belt speed should not exceed 3.15 m/s.

How to Solve Portable Belt Conveyor Belt Skid Problem

Portable belt conveyor is a lightweight continuous conveying equipment with the features of high efficiency, good mobility, and convenient usage. It not only conveys bulking material but also realize conveying bagged material, the angle and lifting height is adjustable. In our daily life of operation, we may have trouble of belt skid problem, today PK Machinery will introduce the method to solve the problem:

1.You can adjust the stroke of tension to increase the tension to solve belt skid problem for the portable conveyor which adopts screw or hydraulic tensioning . However ,if the stroke of tension is not enough, it may lead to permanent belt deformation ,and you need to cut a piece of belt off and vulcanize again.

2.If you require long stroke of tension when using nylon or EP belt, you can also vulcanize the belt or increase the stroke of tension to solve belt skip problem.