Application of Sidewall Belt Conveyor in Thermal Power Plant

1.Requirements
Sidewall belt conveyor is the major equipment to convey coal and lime-ash in thermal power plant. Therefore it has high requirements for the security of equipment. Generally speaking, the whole transit line is equipped with twin channel sidewall belt conveyor, one is put into use, another is as standby application device. Thus, this coal handling system must be equipped with sidewall belt conveyor with 2500m-3000m length. Applying sidewall belt conveyor to thermal powder plant, it can not only simplify procedure, but also save cost.
2.Features
Due to power plant has high requirements for the security of equipment, technical requirements of sidewall belt conveyor are as follows:
1) It has different requirements for belt conveyor when it used to receive, convey or discharge materials. For instance, if the belt conveyor is used to receive materials, the belt speed of it shouldn’t be too high. If it is used to convey materials, it requires that trough angle of idler decrease properly. If plow discharger is put into use, the cover rubber of belt surface should be thicken properly. 
2)The belt speed should be low. Belt conveyor is mostly arranged in workshop, so it has high requirements for coal dust control. According to domestic and foreign practical experience, it’s better to adopt lower speed.

3)After installation of this machine, it seldom changes its layout.
4)Different coal type has different requirements for belt conveyor. For example, large coal particle size needs impact idler with high quality. Coal with less water and more dust needs guide chute with good sealing. 

What Should We Note During the Installation of Large Angle Belt Conveyor

Large angle belt conveyor can be transported with large inclination , it even can be vertical. It adopts sidewall belt as the main part. The advantages are: large conveying amount, small space occupation ,small noise etc. which is widely used for conveying powder, blocked material. Here PK Machinery will introduce the installation notes during installation:
1.Check whether the components of large angle belt conveyor are complete or not
Generally speaking, belt conveyor includes lots of components: head & tail frame, concave & convex segmental arc frame and middle frame, however, the quantity of trough roller frame, rollers and sealing cover is big, you need to check carefully and guarantee the components are transported to the right place.
2.Installation, positioning and welding of head and tail frame, concave and convex segmental arc frame
First of all, please find the center line of the belt conveyor by using a steel wire. When installation, please make the head & tail frame, concave & convex segmental arc frame subject to the center line.

 

3.Check belt running and adjust the belt if it runs off tracking
After installation of belt, trough roller, self-aligning roller and vertical roller, connect the power supply , run the belt and adjust the belt offset distance .
4.Installation of large dip Angle belt conveyor accessories and bolts
After adjusting the belt, you can start to install the sealing cover, head cover and fastening bolts.

Three Horizontal Sections of Large Angle Belt Conveyor

Large angle belt conveyor is suitable for the unit mass of 500 ~ 2500 kg/m3 and the material large size of about 100 ~ 250 mm, the features of large angle belt conveyor are: simple structure, convenient maintenance, space saving and investment saving. Here PK Machinery will explain and introduce three kinds of horizontal section:
1. Upper horizontal section
In order to adapt to the requirement of different discharge height, the head frame is divided into low type frame (head frame height = 1000 mm), middle type head frame (head frame height = 1100 ~ 1100 mm) and high type head frame (head frame height = 1600 ~ 1600 mm).
Correspondingly, low type convex segmental arc frame and low type middle frame support (matched head height = 1000 mm), middle type convex segment frame and middle type frame support (matched head frame height = 1100 ~ 1500 mm), high type convex segment frame and high type middle frame support (matched head frame height = 1600 ~ 1600 mm) will match with upper horizontal section respectively
2. Lower horizontal section
The lower horizontal section adopts low type middle frame support.
3. Inclined section
The inclined section of large angle belt conveyor adopts low type middle frame support. When the conveyor inclined angle β ≧ 45 °, we suggest adopting Ⅱseries low type middle support.

The connection of upper horizontal section and inclined adopts the convex arc segments frame , and the lower horizontal section and inclined section adopt concave segmental arc frame to connect so as to realize the smoothconveyor belt transition.